Labonce Walk-In Stability Chamber
Product categories
Latest product
MIT Series/MIS Series

Mold Incubator(150MIT~800MIT)

TEMP: 0-60°CCapacity:150~250L
  • Item NO.:

    150MIT~800MIT
  • Product Origin:

    CHINA
Product introduction

The mold incubator MI and MIS series are applied in scientific research institutions such as environmental protection, health and epidemic prevention, drug testing, agriculture, animal husbandry, and aquatic products. It is a specialized constant temperature equipment for water analysis, BOD detection, and cultivation of microorganisms such as molds.


Reference Standard:GB/T 28851-2012 Technical conditions for biochemical incubators;

Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber(MI series);

Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean;

Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life;

Control system:LCD temperature controller;

Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data.

Safety device: compressor overheat and overpressure overload protection, independent overtemperature protection alarm system,On-site beeping alarm;

Other configuration:Test holes、mobile casters、 lighting、UV disinfection lights;

Controlling Temperature Precision:

MI Temperature Fluctuation:High temperature ±0.5℃ ;Low temperature ±1.0℃ ;

Temperature Uniformity ≤ 2.0℃(@37℃);

MIS Temperature Fluctuation:±0.5℃ ,Humidity fluctuation:±5%RH;

Power:AC220V±10% 50HZ;

Environment Temperature:+5 ~ 35℃ .


Name

Model

Temperature Range

( ℃ )

Capacity

(L)

Interior Dimensions(mm)

W×D×H

External

Dimensions(mm)

W×D×H

Power

(kW)

Shelf

(Standard)

Remarks

 

 

Mould incubator

Labonce-150MIT

0 ~ 60

150

520×460×600

640×700×1250

0.5

3

With viewing window 

No humidity

Labonce-250MIT

0 ~ 60

250

520×460×1050

620×690×1650

0.6

3

Labonce-500MIT

0 ~ 60

500

680×680×1080

860×1050×1850

1.2

4

     No humidity

Labonce-800MIT

0 ~ 60

800

1200×490×1360

1390×890×1965

1.5

4

Mould incubator

 (With humidity control)

Labonce-250MIS

15 ~ 50

250

600×500×830

780×870×1650

1.5

3

Humidity range:

50-85% RH

Printer options

Labonce-500MIS

15 ~ 50

500

680×680×1080

860×1050×1850

2.0

4




SEND A MESSAGE

Related products
  • Medicine high-light stability chambers Medicine high-light stability chambers

    Temperature:2~30 Capacity:150L~250L

  • LGS series: Special for medicine packages Stability Chamber(LGS series: Special for medicine packages)

    Labonce - LGS  series  medicine  stability chamber  is equipped with  ultra - low  humidity control function, which  meets the requirements of the 2020 Pharmacopoeia and is suitable for GMP and CGMP certified users. ◆ Reference Standard:ICHQ1(A)、Chinese Pharmacopoeia 2020 edition; ◆ Ultra low humidity, special conditions for cartridge testing; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Control system:Programmable color touch screen controller; ◆ Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: compressor overheat and overpressure overload protection, water shortage protection, dry burning protection system, independent overtemperature protection alarm system; ◆ Alarm system:On-site beeping alarm; ◆ Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature and humidity inside the container will not change in a short time,The outer door is solid can keep temperature and humidity,It can also prevent the   influence of external light; ◆ Other configurations:Test hole、Rubber plug、Mobile casters、Door lock; ◆ Special indicators: able to meet 60℃ /10%RH, 25℃ /20%RH special conditions (ambient temperature below 25℃ ); ◆ Controlling Temperature Precision:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±1.0℃ ; ◆ Controlling Humidity Precision:Humidity Fluctuation <  ±3%RH;Humidity Deviation <  ±3%RH; ◆ Environment Temperature:+5  ~  35℃ ; ◆ Power:AC220V±10% 50HZ. ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote  SMS alarm. Model Temperature Range ( ℃ ) Humidity Range (RH) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf    (Standard) Remarks Labonce-250LGS 15 ~  65 10 ~  90% 250 600×500×830 780×880×1650 1.5 3 Single(Temperature+Humidity) Labonce-500LGS 15 ~  65 10 ~  90% 500 680×680×1080 860×1050×1850 2.2 4 Single(Temperature+Humidity) Labonce-520LGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.0 3 A(Temperature+Humidity) 250 600×500×830 3 B(Temperature+Humidity) Labonce-520LCGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.5 3 A(Temperature+Humidity+Visible Light+UVA) 250 600×500×830 3 B(Temperature+Humidity)   Remarks LCGS series: A chamber with temperature, humidity, visible light, UVA four functions, illuminance measurement standard with visible light and UVA     sensor, the visible light value and UVA value are automatically printed and stored; visible light range: 100 ~ 8000Lux, 4500 ± 500Lux, Total illuminance of the light test is not less than 1.2×106 Lux-hr; UVA range: 0.84 ~ 5w/ ㎡ , UVA total energy of not less than 200w-hr/ ㎡ ;When there is no light, the   temperature and humidity indicators are the same as LGS.

  • Low-temperature Stability Chamber(BC/RC/FC Series) Low-temperature Stability Chamber(BC/RC/FC Series)

    Labonce -C Series  Low -temperature Stability Chamber,Adopt the  brand - new air-way structural design, select the original imported high quality parts and manufacturing process, ensure the long -term continuous operation of the equipment, stable and reliable performance, suitable for temperature sensitive medicine stability test and preservation. ◆ Reference Standard:Medical refrigerator industry standard: YY/T 0086-2020; ◆ Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life; ◆ Control system:Original imported digital display controller, high precision, low drift; ◆ Safety device: compressor overheat and overpressure overload protection; ◆ Alarm system:On-site beeping alarm; ◆ Other configuration:Test hole、Rubber plug、Mobile casters、Door lock; ◆ Controlling Temperature Precision:BC:Temperature Fluctuation <  ±1.0℃;Temperature Deviation <  ±2.0℃;Temperature Uniformity ≤ 2.0℃ ; RC:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±1.0℃ ; Temperature Uniformity ≤ 1.0℃ ; FC:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±2.0℃ ; Temperature Uniformity ≤ 2.0℃ ; ◆ Environment Temperature:+5 ~  30℃ ;        Power:AC220V±10% 50HZ; ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote  SMS alarm. Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf     (Standard) Remarks     Storage Chamber (2~14℃ ) Labonce-250BC 2~14 250 600×500×830 780×880×1650 0.6 3     With observation window Labonce-400BC 2~14 400 600×700×950 780×1060×1750 0.8 3 Labonce-500BC 2~14 500 680×680×1080 860×1050×1850 1.0 4 Labonce-800BC 2~14 800 1200×490×1360 1390×890×1960 1.2 4 Labonce-1000BC 2~14 1000 1400×510×1400 1590×890×1980 1.5 4   Low-temperatre Chamber(5℃ ) Labonce-250RC 5 250 600×500×830 780×880×1650 0.6 3 With observation  window,Double  compressors, one operation and one protection. Labonce-500RC 5 500 680×680×1080 860×1050×1850 1.2 4 Labonce-720RC 5 750 1200×490×1360 1390×890×1960 1.5 4 Labonce-2000RC 5 2000 1500×970×1400 1710×1380×1990 2.0 4 Low-temperatre Chamber(-20℃ ) Labonce-150FC -20 150 600×405×620 850×890×1520 1.0 3 Solid door Labonce-250FC -20 250 600×500×830 850×990×1690 1.5 3

  • Stability chamber2000GS Stability Test Chamber(2000L)

    Humidity:20~95%RH Capacity:2000L

  • Mildew incubator Mildew incubator used in environment protection

    Temperature:0~60 Capacity:150L~1000L

  • HT/GHTH Series Precise Blast Drying Oven (HT/GHTH Series)

    TEMP:   RT+ 10~200℃/300℃ CAPACITY: 100L~1000L

  • Biochemical Incubator Biochemical Incubator applied to scientific research

    Temperature:0~60 Capacity:70L~1600L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!