Labonce Walk-In Stability Chamber
Product categories
Latest product
Photostability Chamber

Photostability Chamber(150LTPS-1)

TEMP: 15-50°CCapacity:150L
  • Item NO.:

    150LTPS-1
  • Product Origin:

    CHINA
Product introduction

Labonce-LTPS series low-temperature pharmaceutical light test chamber, compatible with low-temperature 2-8 and room temperature 25 under the conditions of light stability test, the use of new structural design, the use of imported high-quality components to ensure that the equipment for long-term continuous operation, stable and reliable performance.


Internal volume: 150L;
Temperature control range: 2~30℃, temperature fluctuation: ±1.0℃, temperature deviation: ±2.0℃ (same level);
Light range: Visible light range: 100 ~ 6000LUX; total illumination is not less than 1.2 × 106Lux-hr;
UV range: near-ultraviolet range: 0.84~1w/m²; near-ultraviolet energy not less than 200w-hr/m²;
UV wavelength: near-UV wavelength: 320~400nm;
Illumination control: temperature, visible light, near-ultraviolet these three parameters in the controller directly set control;

 Illumination Printing: Can print the temperature, visible light, near-ultraviolet three values at the same time;

Three kinds of controller: imported temperature controller, imported visible light controller, imported near-ultraviolet controller; 
Illumination sensor: with visible light sensor and near-ultraviolet sensor;
Refrigeration compressor: imported hermetic compressor, long life, low noise;
Data printing: can print the temperature value, visible light value and near-ultraviolet value;
Data storage: can store more than 1 year temperature value, visible light value, near-ultraviolet value;
On-site alarm: on-site temperature deviation buzzer alarm, independent over-temperature alarm;
Chamber material: liner material for mirror stainless steel 304, shell material for high-quality steel spray;
Double protection: configure anti over-temperature protection system; configure independent over-temperature protection system, can automatically cut off the power supply;
Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection.
Installation power: AC 220V±10% 50Hz;
Working environment: +5~35℃ (it is recommended to be able to control within 30℃, and within 26℃ when using limit conditions);
Remote alarm: optional remote SMS alarm (with power failure alarm), multiple devices can share a mobile phone card (optional);
Special Note: Consult the PDF and WORD icons below the online, you can download the colour page of this page related information.



Model

Temperature Range

( ℃ )

Capacity

(L)

Interior Dimensions

W×D×H(mm)

External Dimensions

W×D×H(mm)

Power

( kW )

Remarks 1

Labonce-150TPS-1

15 ~  50

150

650×490×500

830×790×1250

1.2

1  layer of light

Labonce-300TPS-2

15 ~  50

300

550×660×770

850×1030×1570

1.5

2 layers of light

Labonce-500TPS-2

15 ~  50

500

660×680×1110

880×1080×1880

1.8

2 layers of light

Labonce-500TPS-3

15 ~  50

500

660×680×1110

880×1080×1880

2.1

3 layers of light

Labonce-1000TPS-3

15 ~  50

1000

1360×490×1360

1620×910×1990

2.5

3 layers of light

Labonce-150LTPS-1

2 ~ 30

150

650×490×500

830×790×1250

1.5

1  layer of light

Labonce-500LTPS-2

2 ~ 30

500

660×680×1110

880×1080×1880

2.1

2 layers of light

Remarks 2


Visible Range: 100 ~  8000Lux, Deviation:4500±500Lux;UVA range:0.84 ~  5w/m2; (TPS)

Visible Range: 100 ~  5000Lux, Deviation:4500±500Lux;UVA range:0.84 ~ 1w/m2; (LTPS)

The total illumination ≥ 1.2×106 Lux •hr; UVA energy  200w •hr/ m2

Each of layer of light: Visible Light+UVA



SEND A MESSAGE

Related products
  • vaccine freezer High Precision Pharmaceutical Refrigerator

    TEMP:-20℃ Capacity:150L~720L

  • MIS Series Mold Incubator 500MIS

    Mold incubator MIS series is used in environmental protection, health epidemic prevention, drug testing, agriculture, livestock and aquatic research institutes. It is a special constant temperature equipment for water analysis, BOD detection, mold and other microbial culture. ❶ Internal volume: 250L~500L; ❷ Temperature control range: 50 ~ 85 ℃, temperature fluctuation: high temperature ± 0.5 ℃, low temperature ± 1 ℃; uniformity ± 2.0 ℃. ❸ Controller: microcomputer controller, sensitive sensing, small system error; ❹ Compressor: fully enclosed compressor, high efficiency, low noise; to ensure long-term continuous operation of the equipment: ❺ Data printing: optional; ❻ Lamp: with lighting, with UV sterilization lamp; ❼ Chamber material: liner material for mirror stainless steel 304, corners of the semi-circular arc, easy to clean, chamber shelf spacing adjustable; ❽ Chamber door structure: the use of double-layer tempered glass door, easy to observe the samples in the chamber; ❾ System protection: equipped with independent over-temperature protection system; ❿ Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection. ⓫ Working environment: +5~35℃. ⓬ Power supply: AC220V±10%50Hz. ⓭ Special Note: Consult the PDF and WORD icons below online to download the color page related information on this page. Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power (kW) Shelf (Standard) Remarks     Mould incubator Labonce-150MIT 0 ~ 60 150 520×460×600 640×700×1250 0.5 3 With viewing window  No humidity Labonce-250MIT 0 ~ 60 250 520×460×1050 620×690×1650 0.6 3 Labonce-500MIT 0 ~ 60 500 680×680×1080 860×1050×1850 1.2 4 No humidity Labonce-800MIT 0 ~ 60 800 1200×490×1360 1385×895×1965 1.5 4 Mould incubator  (With humidity control) Labonce-250MIS 15 ~ 50 250 600×500×830 780×870×1650 1.5 3 Humidity range: 50-85% RH Printer options Labonce-500MIS 15 ~ 50 500 680×680×1080 860×1050×1850 2.0 4

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!