Labonce Walk-In Stability Chamber
Product categories
Latest product
LGS series: Special for medicine packages
LGS series: Special for medicine packages
LGS series: Special for medicine packages

Stability Chamber 250-500LGS

Humidity:10~90%RH Capacity:250-500L
  • Item NO.:

    250-500LGS
  • Product Origin:

    CHINA
Product introduction

Labonce-LGS Series Stability Test Chamber for Pharmaceutical Packaging Materials

Designed with advanced imported technology, this dual-chamber system features independent control:
Chamber A: Controls temperature, humidity, visible light, and near-UV radiation, with real-time recording of illuminance and UV irradiance. Chamber B: Dedicated to pharmaceutical packaging testing, exclusively controls temperature & humidity, capable of extreme conditions (60°C/10%RH).


Temperature Range: 15–65°C | Fluctuation: ±0.5°C | Deviation: ±1.0°C
Humidity Range: 10–90%RH | Fluctuation: ±2.0%RH | Deviation: ±3.0%RH
Visible Light: 100–8000 LUX | Total Illuminance: ≥1.2×10⁶ Lux·hr
Near-UV Range: 0.84–5 W/m² | UV Energy: ≥200 W·hr/m²
Unified Control: Temperature, humidity, visible light, and UV parameters integrated into a single touchscreen controller.
Data Printing: Simultaneous printout of temperature, humidity, visible light, and UV values.
Controller: Large color touchscreen with programmable settings and three-tier access control.
Humidity Sensor: Imported high-precision capacitive sensor (maintenance-free, direct detection).
Compressor: Imported hermetic compressor (long lifespan, low noise).
Advanced Printing: Prints device model/ID, real-time temperature/humidity values, and curves.
Data Storage: Stores records for over 3 years.
On-Site Alarm: Audible/visual alerts for deviations; independent over-temperature alarm.
Remote Alarm: SMS alerts (including power failure); multiple devices share one SIM card.
Construction: Interior: Mirror-finish 304 stainless steel. Exterior: Powder-coated steel plate.
Dual-Door Design: Inner tempered glass door for observation. Outer solid door blocks external light.
Dual Protection: Anti-dry burn system. Independent over-temperature protection (auto power cutoff).
Safety Features: Compressor overheat/overpressure/overload protection + fan overheat protection.
Power Supply: AC 220V±10%, 50Hz.
Operating Environment: +5–35°C (recommended ≤30°C; extreme conditions ≤26°C).
Note: Click the PDF and WORD icons below to download brochures. Product images are for reference; actual specifications may vary.


Model

Temperature Range(℃)

Humidity Range (RH)

Capacity

(L)

Interior 

Dimensions

W×D×H(mm)

External Dimensions

W×D×H(mm)

Power

(kw)

Shelf

(Standard)

      Remarks               

Labonce-250LGS

15~65

10~90%

250

600×500×830

780×880×1650

1.8

3/7

Single(Temperature

+Humidity)

Labonce-500LGS

15~65

10~90%

500

680×680×1080

860×1050×1850

2.2

4/11

 

Remarks

The LCGS series is a climate chamber with temperature, humidity, visible light (100-8000 Lux, ≥1.2×10⁶ Lux·hr total), and UVA (0.84-5 W/m², ≥200 W·hr/m² total) control. It automatically records and prints light data, maintaining LGS-series specs when dark. Ideal for material aging tests.


SEND A MESSAGE

Related products
  • Stability chamber Stability Chamber 520LGS

    Humidity:10~90%RH Capacity:520L

  • Stability chamber Stability Chamber 520LCGS

    Humidity:20~95%RH Capacity:520L

  • Walk-in stability chamber Walk-in Climate Chamber(40000L/60000L)

    Humidity:20~80%RH Capacity:40000-60000L

  • Walk-in stability chamber Pharmaceutical Walk-in Cold Room BC Series

    Humidity:20~80%RH Capacity:8000-80000L

  • LGS series: Special for medicine packages Stability Chamber(LGS series: Special for medicine packages)

    Labonce - LGS  series  medicine  stability chamber  is equipped with  ultra - low  humidity control function, which  meets the requirements of the 2020 Pharmacopoeia and is suitable for GMP and CGMP certified users. ◆ Reference Standard:ICHQ1(A)、Chinese Pharmacopoeia 2020 edition; ◆ Ultra low humidity, special conditions for cartridge testing; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Control system:Programmable color touch screen controller; ◆ Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: compressor overheat and overpressure overload protection, water shortage protection, dry burning protection system, independent overtemperature protection alarm system; ◆ Alarm system:On-site beeping alarm; ◆ Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature and humidity inside the container will not change in a short time,The outer door is solid can keep temperature and humidity,It can also prevent the   influence of external light; ◆ Other configurations:Test hole、Rubber plug、Mobile casters、Door lock; ◆ Special indicators: able to meet 60℃ /10%RH, 25℃ /20%RH special conditions (ambient temperature below 25℃ ); ◆ Controlling Temperature Precision:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±1.0℃ ; ◆ Controlling Humidity Precision:Humidity Fluctuation <  ±3%RH;Humidity Deviation <  ±3%RH; ◆ Environment Temperature:+5  ~  35℃ ; ◆ Power:AC220V±10% 50HZ. ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote  SMS alarm. Model Temperature Range ( ℃ ) Humidity Range (RH) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf    (Standard) Remarks Labonce-250LGS 15 ~  65 10 ~  90% 250 600×500×830 780×880×1650 1.5 3 Single(Temperature+Humidity) Labonce-500LGS 15 ~  65 10 ~  90% 500 680×680×1080 860×1050×1850 2.2 4 Single(Temperature+Humidity) Labonce-520LGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.0 3 A(Temperature+Humidity) 250 600×500×830 3 B(Temperature+Humidity) Labonce-520LCGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.5 3 A(Temperature+Humidity+Visible Light+UVA) 250 600×500×830 3 B(Temperature+Humidity)   Remarks LCGS series: A chamber with temperature, humidity, visible light, UVA four functions, illuminance measurement standard with visible light and UVA     sensor, the visible light value and UVA value are automatically printed and stored; visible light range: 100 ~ 8000Lux, 4500 ± 500Lux, Total illuminance of the light test is not less than 1.2×106 Lux-hr; UVA range: 0.84 ~ 5w/ ㎡ , UVA total energy of not less than 200w-hr/ ㎡ ;When there is no light, the   temperature and humidity indicators are the same as LGS.

  • Stability Testing Chamber two door independent control Stability Testing Chamber two door independent control

    Humidity:40~95%RH Capacity:430L~630L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!