Photostability Chamber(500TPS-3)

Labonce-TPS pharmaceutical strong light stability test chamber, equipped with visible and near-ultraviolet lamps, can independently control the type of light source, and real-time printing and recording of visible light illuminance and near-ultraviolet radiation; visible and near-ultraviolet can be set up directly, automatically adjusted, and accurately control the two types of light sources.

❶ Internal volume: 500L;

❷ Temperature control range: 15~50℃, temperature fluctuation: ±1.0℃, temperature deviation: ±2.0℃ (same level);
❸ Light range: Visible light range: 100 ~ 8000LUX; total illumination is not less than 1.2 × 106Lux-hr;
❹ UV range: near-ultraviolet range: 0.84～5w/m²; near-ultraviolet energy not less than 200w-hr/m²;
❺ UV wavelength: near-UV wavelength: 320～400nm;
❻ Illumination control: temperature, visible light, near-ultraviolet these three parameters in the controller directly set control;

❼ Illumination Printing: Can print the temperature, visible light, near-ultraviolet three values at the same time;

❽ Three kinds of controller: imported temperature controller, imported visible light controller, imported near-ultraviolet controller; 
❾ Illumination sensor: with visible light sensor and near-ultraviolet sensor;
❿ Refrigeration compressor: imported hermetic compressor, long life, low noise;
⓫ Data printing: can print the temperature value, visible light value and near-ultraviolet value;
⓬ Data storage: can store more than 1 year temperature value, visible light value, near-ultraviolet value;
⓭ On-site alarm: on-site temperature deviation buzzer alarm, independent over-temperature alarm;
⓮ Chamber material: liner material for mirror stainless steel 304, shell material for high-quality steel spray;
⓯ Double protection: configure anti over-temperature protection system; configure independent over-temperature protection system, can automatically cut off the power supply;
⓰ Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection.
⓱ Installation power: AC 220V±10% 50Hz;
⓲ Working environment: ＋5～35℃ (it is recommended to be able to control within 30℃, and within 26℃ when using limit conditions);
⓳ Remote alarm: optional remote SMS alarm (with power failure alarm), multiple devices can share a mobile phone card (optional);
⓴ Special Note: Consult the PDF and WORD icons below the online, you can download the colour page of this page related information.