Labonce Walk-In Stability Chamber
Product categories
Latest product
Photostability chamber

Photostability Chamber(150TPS-1)

TEMP: 15-50°CCapacity:150L
  • Item NO.:

    150TPS-1
  • Product Origin:

    CHINA
Product introduction

Labonce-TPS pharmaceutical strong light stability test chamber, equipped with visible and near-ultraviolet lamps, can independently control the type of light source, and real-time printing and recording of visible light illuminance and near-ultraviolet radiation; visible and near-ultraviolet can be set up directly, automatically adjusted, and accurately control the two types of light sources.



 Internal volume: 150L;

 Temperature control range: 15~50℃, temperature fluctuation: ±1.0℃, temperature deviation: ±2.0℃ (same level);
 Light range: Visible light range: 100 ~ 8000LUX; total illumination is not less than 1.2 × 106Lux-hr;
 UV range: near-ultraviolet range: 0.84~5w/m²; near-ultraviolet energy not less than 200w-hr/m²;
 UV wavelength: near-UV wavelength: 320~400nm;
 Illumination control: temperature, visible light, near-ultraviolet these three parameters in the controller directly set control;

 Illumination Printing: Can print the temperature, visible light, near-ultraviolet three values at the same time;

 Three kinds of controller: imported temperature controller, imported visible light controller, imported near-ultraviolet controller; 
 Illumination sensor: with visible light sensor and near-ultraviolet sensor;
 Refrigeration compressor: imported hermetic compressor, long life, low noise;
 Data printing: can print the temperature value, visible light value and near-ultraviolet value;
 Data storage: can store more than 1 year temperature value, visible light value, near-ultraviolet value;
 On-site alarm: on-site temperature deviation buzzer alarm, independent over-temperature alarm;
 Chamber material: liner material for mirror stainless steel 304, shell material for high-quality steel spray;
 Double protection: configure anti over-temperature protection system; configure independent over-temperature protection system, can automatically cut off the power supply;
 Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection.
 Installation power: AC 220V±10% 50Hz;
 Working environment: +5~35℃ (it is recommended to be able to control within 30℃, and within 26℃ when using limit conditions);
⓳ Remote alarm: optional remote SMS alarm (with power failure alarm), multiple devices can share a mobile phone card (optional);
 Special Note: Consult the PDF and WORD icons below the online, you can download the colour page of this page related information.


Model

Temperature Range

( ℃ )

Capacity

(L)

Interior Dimensions

W×D×H(mm)

External Dimensions

W×D×H(mm)

Power

( kW )

Remarks 1

Labonce-150TPS-1

15 ~  50

150

650×490×500

830×790×1250

1.2

1  layer of light

Labonce-300TPS-2

15 ~  50

300

550×660×770

850×1030×1570

1.5

2 layers of light

Labonce-500TPS-2

15 ~  50

500

660×680×1110

880×1080×1880

1.8

2 layers of light

Labonce-500TPS-3

15 ~  50

500

660×680×1110

880×1080×1880

2.1

3 layers of light

Labonce-1000TPS-3

15 ~  50

1000

1360×490×1360

1620×910×1990

2.5

3 layers of light

Labonce-150LTPS-1

2 ~ 30

150

650×490×500

830×790×1250

1.5

1  layer of light

Labonce-500LTPS-2

2 ~ 30

500

660×680×1110

880×1080×1880

2.1

2 layers of light

Remarks 2


Visible Range: 100 ~  8000Lux, Deviation:4500±500Lux;UVA range:0.84 ~  5w/m2; (TPS)

Visible Range: 100 ~  5000Lux, Deviation:4500±500Lux;UVA range:0.84 ~ 1w/m2; (LTPS)

The total illumination ≥ 1.2×106 Lux •hr; UVA energy  200w •hr/ m2

Each of layer of light: Visible Light+UVA





SEND A MESSAGE

Related products
  • BI Series Biochemical Incubator(BI Series)

    Labonce- BI series of biochemical incubator is applied in scientific research and production departments such as environmental protection, health and epidemic prevention, agriculture, animal husbandry, and aquatic products, drug testing, and cell culture. ◆ Reference standard: GB/T 28851-2012 Technical conditions for biochemical incubators; ◆ Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life; ◆ Control system:LCD temperature controller; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data; ◆ Safety device: compressor overheat and overpressure overload protection, independent overtemperature protection alarm system,On-site beeping alarm; ◆ Other configuration:Test hole、Rubber plug、Mobile casters; ◆ Controlling Temperature Precision:Temperature Fluctuation:High temperature ±0. 5℃;   Low temperature  ±1.0℃ ; Temperature Uniformity  ≤ 2.0℃(@37℃); ◆ Environment Temperature:+5 ~  35℃ ; ◆ Power:AC220V±10% 50HZ; ◆ Optional: ① UV sterilization system;             ② Three- level permission color touch screen controller; ③ SMS alarm;                                  ④ Humidity display function. Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf     (Standard) Remarks       Biochemical Incubator Labonce-150BI 0 ~  60 150 520×460×600 640×700×1250 0.5 3 150-250L Configure obser vation window Labonce-250BI 0 ~  60 250 520×460×1050 620×690×1650 0.6 3 Labonce-400BI 0 ~  60 400 600×700×950 780×1060×1750 1.0 3   400-2000L Configured with built-in glass doors Labonce-500BI 0 ~  60 500 680×680×1080 860×1050×1850 1.2 4 Labonce-800BI 0 ~  60 800 1200×490×1360 1390×890×1960 1.5 4 Labonce-1000BI 0 ~  60 1000 1400×510×1400 1590×890×1980 2.0 4 Labonce-2000BI 0 ~  60 2000 1500×970×1400 1710×1380×1990 2.5 4 Biochemical Incubator Labonce-250BI-H 0 ~  60 250 520×460×1050 620×690×1650 0.6 3 With humidity display Labonce-800BI-H 0 ~  60 800 1200×490×1360 1390×890×1960 1.5 4

  • Walk-in stability chamber Walk-in Climate Chamber(40000L/60000L)

    Humidity:20~80%RH Capacity:40000-60000L

  • Walk-in stability chamber Media Fill Simulation Room

    Humidity:20~80%RH Capacity:8000-15000L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!