Photostability Chamber(500TPS-2)

TEMP: 15-50°C

Capacity：500L

Item NO.:
500TPS-2
Product Origin:
CHINA

Online consulting

Product introduction

Labonce-TPS pharmaceutical strong light stability test chamber, equipped with visible and near-ultraviolet lamps, can independently control the type of light source, and real-time printing and recording of visible light illuminance and near-ultraviolet radiation; visible and near-ultraviolet can be set up directly, automatically adjusted, and accurately control the two types of light sources.

❶ Internal volume: 500L;

❷ Temperature control range: 15~50℃, temperature fluctuation: ±1.0℃, temperature deviation: ±2.0℃ (same level);
❸ Light range: Visible light range: 100 ~ 8000LUX; total illumination is not less than 1.2 × 106Lux-hr;
❹ UV range: near-ultraviolet range: 0.84～5w/m²; near-ultraviolet energy not less than 200w-hr/m²;
❺ UV wavelength: near-UV wavelength: 320～400nm;
❻ Illumination control: temperature, visible light, near-ultraviolet these three parameters in the controller directly set control;

❼ Illumination Printing: Can print the temperature, visible light, near-ultraviolet three values at the same time;

❽ Three kinds of controller: imported temperature controller, imported visible light controller, imported near-ultraviolet controller;
❾ Illumination sensor: with visible light sensor and near-ultraviolet sensor;
❿ Refrigeration compressor: imported hermetic compressor, long life, low noise;
⓫ Data printing: can print the temperature value, visible light value and near-ultraviolet value;
⓬ Data storage: can store more than 1 year temperature value, visible light value, near-ultraviolet value;
⓭ On-site alarm: on-site temperature deviation buzzer alarm, independent over-temperature alarm;
⓮ Chamber material: liner material for mirror stainless steel 304, shell material for high-quality steel spray;
⓯ Double protection: configure anti over-temperature protection system; configure independent over-temperature protection system, can automatically cut off the power supply;
⓰ Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection.
⓱ Installation power: AC 220V±10% 50Hz;
⓲ Working environment: ＋5～35℃ (it is recommended to be able to control within 30℃, and within 26℃ when using limit conditions);
⓳ Remote alarm: optional remote SMS alarm (with power failure alarm), multiple devices can share a mobile phone card (optional);
⓴ Special Note: Consult the PDF and WORD icons below the online, you can download the colour page of this page related information.

Model	Temperature Range ( ℃ )	Capacity (L)	Interior Dimensions W×D×H(mm)	External Dimensions W×D×H(mm)	Power ( kW )	Remarks 1
Labonce-150TPS-1	15 ~ 50	150	650×490×500	830×790×1250	1.2	1 layer of light
Labonce-300TPS-2	15 ~ 50	300	550×660×770	850×1030×1570	1.5	2 layers of light
Labonce-500TPS-2	15 ~ 50	500	660×680×1110	880×1080×1880	1.8	2 layers of light
Labonce-500TPS-3	15 ~ 50	500	660×680×1110	880×1080×1880	2.1	3 layers of light
Labonce-1000TPS-3	15 ~ 50	1000	1360×490×1360	1620×910×1990	2.5	3 layers of light
Labonce-150LTPS-1	2 ~ 30	150	650×490×500	830×790×1250	1.5	1 layer of light
Labonce-500LTPS-2	2 ~ 30	500	660×680×1110	880×1080×1880	2.1	2 layers of light
Remarks 2	Visible Range: 100 ~ 8000Lux, Deviation:4500±500Lux；UVA range：0.84 ~ 5w/m²; (TPS) Visible Range: 100 ~ 5000Lux, Deviation:4500±500Lux；UVA range：0.84 ~ 1w/m²; (LTPS) The total illumination ≥ 1.2×10⁶ Lux •hr; UVA energy ≥ 200w •hr/ m² Each of layer of light: Visible Light+UVA