Labonce Walk-In Stability Chamber
Product categories
Latest product
Photo Stability Test Chamber(1000TPS-3)
Photo Stability Test Chamber(1000TPS-3)
Photo Stability Test Chamber(1000TPS-3)

Photo Stability Test Chamber(1000TPS-3)

TEMP: 15-50°CCapacity:1000L
  • Item NO.:

    1000TPS-3
  • Product Origin:

    CHINA
Product introduction


labonce-TPS series photo-stability chamber is equipped with visible and near-ultraviolet light tubes, can independently control the type of light source, and can real-time printing and recording of visible light and near-UV radiation. visible light and near ultraviolet can be set directly and adjusted automatically to precisely control both light sources.


Equipped with D65 light source, near ultraviolet wavelength 320-400nm;The light source of each layer is controlled independently;With three levels of user authority, audit trail;

Reference Standard: ICHQ1B、Chinese Pharmacopoeia 2020 edition;

Light source design: The use of reasonable light source top design, the shelves of different positions of the sample to receive the light source irradiation of good uniformity;

Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance;

Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution

Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life;

Control system: Programmable color touch screen controller, with three levels of user rights and audit trail function;more than 7 inches;With three levels of user authority, audit trail;

Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data.

 Safety device: Compressor overheat and overpressure overload protection, independent overtemperature protection alarm system;

Alarm system:On-site beeping alarm;

Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature inside the container will not change in a short time,The outer door is solid can keep temperature,It can also prevent the influence of external light;

Other configurations:Test hole、Rubber plug、Mobile casters; Door lock;

 Illumination open:Temperature Fluctuation < ±1.0℃,

 Temperature deviation of the same layer: < ±2.0℃ ;

Environment Temperature:+5 ~ 35℃ ;

Power:AC220V±10% 50HZ;

Optional: Temperature-humidity deviation, sudden power failure , control by Remote SMS alarm.


Model

Temperature Range

( ℃ )

Capacity

(L)

Interior Dimensions(mm)

W×D×H

External Dimensions(mm)

W×D×H

Power

( kW )

Remarks

Labonce-150TPS-1

15 ~  50

150

650×490×500

830×790×1250

1.2

1   layer of light, 

Visible Light+UVA

Labonce-300TPS-2

15 ~  50

300

550×660×770

850×1030×1570

1.5

2  layers of light, 

Visible Light+UVA

Labonce-500TPS-2

15 ~  50

500

660×680×1110

880×1080×1880

1.8

2  layers of light,

 Visible Light+UVA

Labonce-500TPS-3

15 ~  50

500

660×680×1110

880×1080×1880

2.1

3  layers of light, 

Visible Light+UVA

Labonce-1000TPS-3

15 ~  50

1000

1360×490×1360

1620×910×1990

2.5

3  layers of light, 

Visible Light+UVA

Labonce-150LTPS-1

2 ~ 30

150

650×490×500

830×790×1250

1.5

1   layer of light, 

Visible Light+UVA

Labonce-500LTPS-2

2 ~ 30

500

660×680×1110

880×1080×1880

2.1

2  layers of light, 

Visible Light+UVA

Remarks

TPS:Visible Range100 ~  8000Lux,Direct SettingIlluminance deviation:4500±500LuxUVA range0.84 ~  5w/m2;        LTPS:Visible Range100 ~  5000Lux,Direct SettingIlluminance deviation:4500±500LuxUVA range0.84 ~ 1w/m2;        Illumination requirementsThe total illumination is not less than 1.2×106  Lux •hr; UVA energy is not less than 200w •hr/ m2.


SEND A MESSAGE

Related products
  • Low-temperature Stability Chamber(BC/RC/FC Series) Low-temperature Stability Chamber(BC/RC/FC Series)

    Labonce -C Series  Low -temperature Stability Chamber,Adopt the  brand - new air-way structural design, select the original imported high quality parts and manufacturing process, ensure the long -term continuous operation of the equipment, stable and reliable performance, suitable for temperature sensitive medicine stability test and preservation. ◆ Reference Standard:Medical refrigerator industry standard: YY/T 0086-2020; ◆ Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life; ◆ Control system:Original imported digital display controller, high precision, low drift; ◆ Safety device: compressor overheat and overpressure overload protection; ◆ Alarm system:On-site beeping alarm; ◆ Other configuration:Test hole、Rubber plug、Mobile casters、Door lock; ◆ Controlling Temperature Precision:BC:Temperature Fluctuation <  ±1.0℃;Temperature Deviation <  ±2.0℃;Temperature Uniformity ≤ 2.0℃ ; RC:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±1.0℃ ; Temperature Uniformity ≤ 1.0℃ ; FC:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±2.0℃ ; Temperature Uniformity ≤ 2.0℃ ; ◆ Environment Temperature:+5 ~  30℃ ;        Power:AC220V±10% 50HZ; ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote  SMS alarm. Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf     (Standard) Remarks     Storage Chamber (2~14℃ ) Labonce-250BC 2~14 250 600×500×830 780×880×1650 0.6 3     With observation window Labonce-400BC 2~14 400 600×700×950 780×1060×1750 0.8 3 Labonce-500BC 2~14 500 680×680×1080 860×1050×1850 1.0 4 Labonce-800BC 2~14 800 1200×490×1360 1390×890×1960 1.2 4 Labonce-1000BC 2~14 1000 1400×510×1400 1590×890×1980 1.5 4   Low-temperatre Chamber(5℃ ) Labonce-250RC 5 250 600×500×830 780×880×1650 0.6 3 With observation  window,Double  compressors, one operation and one protection. Labonce-500RC 5 500 680×680×1080 860×1050×1850 1.2 4 Labonce-720RC 5 750 1200×490×1360 1390×890×1960 1.5 4 Labonce-2000RC 5 2000 1500×970×1400 1710×1380×1990 2.0 4 Low-temperatre Chamber(-20℃ ) Labonce-150FC -20 150 600×405×620 850×890×1520 1.0 3 Solid door Labonce-250FC -20 250 600×500×830 850×990×1690 1.5 3

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2024 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!