Stability Chamber 720FS

1)High precision;2)All stainless steel 304 inside and outside;. 3)Temperature:0~70℃;4)Humidity:10~80%RH.

1)High precision; 2)All stainless steel 304 inside and outside;. 3)Temperature:0~70℃; 4)Humidity:10~80%RH.

1)High precision;2)All stainless steel 304 inside and outside;. 3)Temperature:0~70℃;4)Humidity:10~80%RH.

TEMP

Humidity：40~95%RH Capacity：800L~2000L

1)High precision; 2)All stainless steel 304 inside and outside;. 3)Temperature:0~70℃; 4)Humidity:10~80%RH.

Humidity：20~80%RH Capacity：20000-33000L

Mold incubator MIS series is used in environmental protection, health epidemic prevention, drug testing, agriculture, livestock and aquatic research institutes. It is a special constant temperature equipment for water analysis, BOD detection, mold and other microbial culture. ❶ Internal volume: 250L~500L; ❷ Temperature control range: 50 ~ 85 ℃, temperature fluctuation: high temperature ± 0.5 ℃, low temperature ± 1 ℃; uniformity ± 2.0 ℃. ❸ Controller: microcomputer controller, sensitive sensing, small system error; ❹ Compressor: fully enclosed compressor, high efficiency, low noise; to ensure long-term continuous operation of the equipment: ❺ Data printing: optional; ❻ Lamp: with lighting, with UV sterilization lamp; ❼ Chamber material: liner material for mirror stainless steel 304, corners of the semi-circular arc, easy to clean, chamber shelf spacing adjustable; ❽ Chamber door structure: the use of double-layer tempered glass door, easy to observe the samples in the chamber; ❾ System protection: equipped with independent over-temperature protection system; ❿ Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection. ⓫ Working environment: ＋5～35℃. ⓬ Power supply: AC220V±10%50Hz. ⓭ Special Note: Consult the PDF and WORD icons below online to download the color page related information on this page. Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power (kW) Shelf (Standard) Remarks     Mould incubator Labonce-150MIT 0 ~ 60 150 520×460×600 640×700×1250 0.5 3 With viewing window  No humidity Labonce-250MIT 0 ~ 60 250 520×460×1050 620×690×1650 0.6 3 Labonce-500MIT 0 ~ 60 500 680×680×1080 860×1050×1850 1.2 4 No humidity Labonce-800MIT 0 ~ 60 800 1200×490×1360 1385×895×1965 1.5 4 Mould incubator  (With humidity control) Labonce-250MIS 15 ~ 50 250 600×500×830 780×870×1650 1.5 3 Humidity range: 50-85% RH Printer options Labonce-500MIS 15 ~ 50 500 680×680×1080 860×1050×1850 2.0 4