Labonce Walk-In Stability Chamber
Product categories
Latest product
high and low temperature test box
high and low temperature test box
high and low temperature test box

High-Low Temperature Chamber 1000GDJ

TEMP:-20~150℃;-40~150℃-60~150℃
  • Item NO.:

    100GDJ~1000GDJ
  • Product Origin:

    CHINA
Product introduction

Labonce-GDJ series high and low temperature test box is applied to the adaptability test of electrotechnics, electronic products, their original devices, and other materials when they are stored, transported and used in high and low temperature environment. Under low temperature, high temperature and other conditions, the physical and other related characteristics of the product are simulated and tested. After the test, the performance of the product can be judged by the test and whether it still meets the predetermined requirements for product design, improvement, identification and delivery inspection.

 
Volume: 100L~1000L;
Temperature control range: GDJA: -20 ~ 150 ℃; GDJB: -40 ~ 150 ℃; GDJC: -60 ~ 150 ℃
Temperature fluctuation: < ± 0.5 ℃; Rising temperature rate: 3 ℃ / min; cooling rate: 1 ℃ / min. Temperature deviation: < ±2.0℃;
Temperature controller: original imported digital display controller;
Refrigeration compressor: original imported hermetic compressor, long life, low noise;
Data storage: U disk storage, can store more than one year temperature and humidity values;
 Chamber material: liner material for mirror stainless steel 304, shell material for high-quality steel spray;
Safety devices: compressor overheating protection and overpressure overload protection; fan overheating protection;
On-site alarm: temperature upper and lower limit deviation alarm; independent over-temperature protection alarm system;
Power supply: AC 220V±10% 50Hz (AC 380V±10% 50Hz);     
Special Note: Online consultation below the PDF and WORD icons, you can download the color page of this page related information.


Name     

Model

   Temp    

Capacity

(L)

Interior Dimens 

W×D×H(mm)

External Dimens 

W×D×H(mm)

Shelf   

Remarks

 

 High-low temperature chamber

Labonce-100GDJ

 

GDJA:-20~150℃

 GDJB:-40~150℃

GDJC:-60~150℃

100

450×450×500

730×1040×1570

2

 

 Power specs refer to the tech specs of the corresponding model

Labonce-250GDJ

250

650×550×700

930×1180×1850

2

Labonce-500GDJ

500

800×700×900

1250×1150×2080  

2

Labonce-1000GDJ

1000

1000×1000×1000

1500×1500×2200

2

 

 

 


 

SEND A MESSAGE

Related products
  • High-low temperature chamber High-Low Temperature Chamber 1000JS

    TEMP:-20~150℃;-40~150℃;-60~150℃

  • Stability Chamber, Stability test chamber Stability Chamber(<500L)

    Humidity:15~95%RH Capacity:150~500L

  • Vacuum drying oven High Precision Vacuum Drying Oven 6210VC

    TEMP:   RT+ 10~200℃ Capacity: 90L~210L

  • Stability chamber1500GS Stability Test Chamber(1500L)

    Humidity:20~95%RH Capacity:1500L

  • MIS Series Mold Incubator 500MIS

    Mold incubator MIS series is used in environmental protection, health epidemic prevention, drug testing, agriculture, livestock and aquatic research institutes. It is a special constant temperature equipment for water analysis, BOD detection, mold and other microbial culture. ❶ Internal volume: 250L~500L; ❷ Temperature control range: 50 ~ 85 ℃, temperature fluctuation: high temperature ± 0.5 ℃, low temperature ± 1 ℃; uniformity ± 2.0 ℃. ❸ Controller: microcomputer controller, sensitive sensing, small system error; ❹ Compressor: fully enclosed compressor, high efficiency, low noise; to ensure long-term continuous operation of the equipment: ❺ Data printing: optional; ❻ Lamp: with lighting, with UV sterilization lamp; ❼ Chamber material: liner material for mirror stainless steel 304, corners of the semi-circular arc, easy to clean, chamber shelf spacing adjustable; ❽ Chamber door structure: the use of double-layer tempered glass door, easy to observe the samples in the chamber; ❾ System protection: equipped with independent over-temperature protection system; ❿ Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection. ⓫ Working environment: +5~35℃. ⓬ Power supply: AC220V±10%50Hz. ⓭ Special Note: Consult the PDF and WORD icons below online to download the color page related information on this page. Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power (kW) Shelf (Standard) Remarks     Mould incubator Labonce-150MIT 0 ~ 60 150 520×460×600 640×700×1250 0.5 3 With viewing window  No humidity Labonce-250MIT 0 ~ 60 250 520×460×1050 620×690×1650 0.6 3 Labonce-500MIT 0 ~ 60 500 680×680×1080 860×1050×1850 1.2 4 No humidity Labonce-800MIT 0 ~ 60 800 1200×490×1360 1385×895×1965 1.5 4 Mould incubator  (With humidity control) Labonce-250MIS 15 ~ 50 250 600×500×830 780×870×1650 1.5 3 Humidity range: 50-85% RH Printer options Labonce-500MIS 15 ~ 50 500 680×680×1080 860×1050×1850 2.0 4

  • CT Series Constant Temperature Chamber(800CT~1000CT)

    TEMP:  0~85℃ CAPACITY: 800L~1000L

  • Stability chamber430CGS,Stability chamber630CGS Stability chamber (100L+100L+230L,UVA)

    Humidity:40~95%RH Capacity:430L~630L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2026 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!