Labonce Walk-In Stability Chamber
Product categories
Latest product
MI Series/MIS Series

Mold Incubator(150MI~250M)

TEMP: 0-60°CCapacity:150~250L
  • Item NO.:

    150MI~250MI
  • Product Origin:

    CHINA
Product introduction

The mold incubator MI and MIS series are applied in scientific research institutions such as environmental protection, health and epidemic prevention, drug testing, agriculture, animal husbandry, and aquatic products. It is a specialized constant temperature equipment for water analysis, BOD detection, and cultivation of microorganisms such as molds.


Reference Standard:GB/T 28851-2012 Technical conditions for biochemical incubators;

Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber(MI series);

Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean;

Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life;

Control system:LCD temperature controller;

Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data.

Safety device: compressor overheat and overpressure overload protection, independent overtemperature protection alarm system,On-site beeping alarm;

Other configuration:Test holes、mobile casters、 observation windows、 lighting、UV disinfection lights;

Controlling Temperature Precision:

MI Temperature Fluctuation:High temperature ±0.5℃ ;Low temperature ±1.0℃ ;

Temperature Uniformity ≤ 2.0℃(@37℃);

MIS Temperature Fluctuation:±0.5℃ ,Humidity fluctuation:±5%RH;

Power:AC220V±10% 50HZ;

Environment Temperature:+5 ~ 35℃ .


Name

Model

Temperature Range

( ℃ )

Capacity

(L)

Interior Dimensions(mm)

W×D×H

External

Dimensions(mm)

W×D×H

Power

( kW )

Shelf

(Standard)

Remarks

 

 

Mould incubator

Labonce-150MI

0 ~  60

150

520×460×600

640×700×1250

0.5

3

 

 

No humidity

Labonce-250MI

0 ~  60

250

520×460×1050

620×690×1650

0.6

3

Labonce-500MI

0 ~  60

500

680×680×1080

860×1050×1850

1.2

4

Labonce-800MI

0 ~  60

800

1200×490×1360

1390×890×1960

1.5

4

Mould incubator        (With humidity control)

Labonce-250MIS

15 ~  50

250

600×500×830

780×870×1650

1.5

3

Humidity range:

50-85% RH

Printer options

Labonce-500MIS

15 ~  50

500

680×680×1080

860×1050×1850

2.0

4

SEND A MESSAGE

Related products
  • MI Series/MIS Series Mold Incubator(500MIS)

    TEMP: 0-60°CCapacity:500L

  • Medicine Strong photo stability chambers Medicine Strong photo stability chambers

    Temperature:2~30 Capacity:150L~250L

  • Photo Stability chamber Double Door Strong Medicine Photostability Test Chamber

    Temperature:15~50 ℃ Capacity:300L~1000L

  • LGS series: Special for medicine packages Stability Chamber(medicine packages250L-500L)

    Humidity:10~90%RH Capacity:250-500LGS

  • Constant Temperature & humidity incubator Constant Temperature and humidity chamber

    Humidity:40~90%RH Capacity:60L~500L

  • GHTH Series Precise Blast Drying Oven (300°C)

    TEMP:   RT+ 10~300℃ CAPACITY: 100L~1000L

  • MI Series/MIS Series Mold Incubator(MI Series/MIS Series)

    The mold incubator MI and MIS series are applied in scientific research institutions such as environmental protection, health and epidemic prevention, drug testing, agriculture, animal husbandry, and aquatic products. It is a specialized constant temperature equipment for water analysis, BOD detection, and cultivation of microorganisms such as molds. ◆ Reference Standard:GB/T 28851-2012 Technical conditions for biochemical incubators; ◆ Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber(MI series); ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life; ◆ Control system:LCD temperature controller; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: compressor overheat and overpressure overload protection, independent overtemperature protection alarm system,On-site beeping alarm; ◆ Other configuration:Test holes、mobile casters、   observation windows、   lighting、UV disinfection lights; ◆ Controlling Temperature Precision:MI Temperature Fluctuation:High temperature ±0. 5℃ ;Low temperature  ±1.0℃ ; Temperature Uniformity  ≤ 2.0℃(@37℃); MIS Temperature Fluctuation:±0. 5℃ ,Humidity fluctuation:±5%RH; ◆ Power:AC220V±10% 50HZ; ◆ Environment Temperature:+5 ~  35℃ . Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf     (Standard) Remarks     Mould incubator Labonce-150MI 0 ~  60 150 520×460×600 640×700×1250 0.5 3     No humidity Labonce-250MI 0 ~  60 250 520×460×1050 620×690×1650 0.6 3 Labonce-500MI 0 ~  60 500 680×680×1080 860×1050×1850 1.2 4 Labonce-800MI 0 ~  60 800 1200×490×1360 1390×890×1960 1.5 4 Mould incubator        (With humidity control) Labonce-250MIS 15 ~  50 250 600×500×830 780×870×1650 1.5 3 Humidity range: 50-85% RH Printer options Labonce-500MIS 15 ~  50 500 680×680×1080 860×1050×1850 2.0 4

  • Temperature Humidity Stability Test Chamber Stability Chamber(150L)

    Humidity:20~95%RH Capacity:150L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2023 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!