Labonce Walk-In Stability Chamber
Product categories
Latest product
CT Series

Constant Temperature Chamber(800CT~1000CT)

TEMP:  0~85℃ CAPACITY: 800L~1000L
  • Item NO.:

    800CT~1000CT
  • Product Origin:

    CHINA
Product introduction


Labonce - CT  series constant temperature chamber  is  suitable for  high -temperature damage experiments of drugs and temperature resistance tests of packaging materials, as well as high-temperature aging tests of materials.


Reference standard: GB/T 10586-2006 Technical Conditions for thermal- humidity chamber ;

Air-way system: a new air-way system design, three sides of the air, good temperature uniformity in different locations within the chamber;

Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel, with built-in glass door;

Control system: Programmable color touch screen controller with three- level user permissions and audit tracking function;

Data management: Configure electronic data storage function, which can export data through a USB flash drive;

Safety device: Equipped with an independent overtemperature protection system to protect the safety of samples and equipment;

Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature and humidity inside the container will not change in a short time,The outer door is solid can keep temperature,It can also prevent the influence of external light;

Temperature control accuracy: CT series:Temperature fluctuation<± 0.5 ℃ ;  Temperature deviation<± 1.0 ℃ ; Temperature uniformity ≤ 2.0 ℃ ;

Power: AC220V ± 10% 50Hz.


Name

Model

Temperature Range

( ℃ )

Capacity

(L)

Interior Dimensions(mm)

W×D×H

External Dimensions(mm)

W×D×H

Power

( kW )

Shelf

(Standard)

Remarks

 

 

 

 

 

Constant temperature chamber

Labonce-50CT

 

 

 

 

 

0 ~ 85

50

400×310×350

590×520×740

1.0

2

 

 

 

 

Temperature

uniformity:

≤ 2.0 ℃

Labonce-150CT

150

600×405×620

780×830×1480

1.2

3

Labonce-250CT

250

600×500×830

780×880×1650

1.5

3

Labonce-400CT

400

600×700×950

780×1060×1750

2.0

3

Labonce-500CT

500

680×680×1080

860×1050×1850

2.2

4

Labonce-800CT

800

1200×490×1360

1390×890×1960

2.5

4

Labonce-1000CT

1000

1400×510×1400

1590×890×1980

3.0

4

Constant temperature

chamber

Labonce-720TT

0 85

 

750

 1200×490×1360

 1385×895×1965

2.5

4

Temperature

uniformity:

1.0

Labonce-1000TT

1000

1400×510×1400

1615×925×1975

3.0

4




SEND A MESSAGE

Related products
  • TH Series Constant Temperture & Humidity Chamber(150TH~500TH,0~100℃)

    Humidity:20~95%RH Capacity:150~500L

  • CH Series Constant Temperature & Humidity Chamber(150CH~500CH,15~60℃)

    Humidity:40~90%RH Capacity:150~500L

  • TH Series Constant Temperture & Humidity Chamber(800TH~1000TH,0~100℃)

    Humidity:20~95%RH Capacity:800~1000L

  • CH Series Constant Temperature & Humidity Chamber(800CH~1000CH,15~60℃)

    Humidity:40~90%RH Capacity:800~1000L

  • CT Series Constant Temperature Chamber(50CT)

    TEMP:   0~85℃ CAPACITY: 50L

  • CT Series Constant Temperature Chamber(150CT~500CT)

    TEMP:  0~85℃ CAPACITY: 150L~500L

  • Photo-stability Chamber(TPS Series) Photo-stability Chamber(TPS Series)

    labonce-TPS series photo-stability chamber is equipped with visible  and near-ultraviolet light tubes, can independently control the type of light source, and can real -time printing and recording of visible light and near- UV radiation. visible light and near- ultraviolet can be set directly and adjusted automatically to precisely control both light sources. ◆ Equipped with D65 light source, near ultraviolet wavelength 320-400nm; ◆ Reference Standard: ICHQ1B、Chinese Pharmacopoeia 2020 edition; ◆ Light source design: The use of reasonable light source top design, the shelves of different positions of the sample to receive the light source irradiation of good uniformity; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life; ◆ Control system: Programmable color touch screen controller, with three levels of user rights and audit trail function; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: Compressor overheat and overpressure overload protection, independent overtemperature protection alarm system; ◆ Alarm system:On-site beeping alarm; ◆ Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature inside the container will not change in a short time,The outer door is solid can keep  temperature ,It can also prevent the influence of external light; ◆ Other configurations:Test hole、Rubber plug、Mobile casters; ◆ Illumination open:Temperature Fluctuation <  ±1.0℃,Temperature deviation of the same layer: <  ±2.0℃ ; ◆ Environment Temperature:+5  ~  35℃ ; ◆ Power:AC220V±10% 50HZ; ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote  SMS alarm. Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Remarks Labonce-150TPS-1 15 ~  50 150 650×490×500 830×790×1250 1.2 1   layer of light, Visible Light+UVA Labonce-300TPS-2 15 ~  50 300 550×660×770 850×1030×1570 1.5 2  layers of light, Visible Light+UVA Labonce-500TPS-2 15 ~  50 500 660×680×1110 880×1080×1880 1.8 2  layers of light, Visible Light+UVA Labonce-500TPS-3 15 ~  50 500 660×680×1110 880×1080×1880 2.1 3  layers of light, Visible Light+UVA Labonce-1000TPS-3 15 ~  50 1000 1360×490×1360 1620×910×1990 2.5 3  layers of light, Visible Light+UVA Labonce-150LTPS-1 2 ~ 30 150 650×490×500 830×790×1250 1.5 1   layer of light, Visible Light+UVA Labonce-500LTPS-2 2 ~ 30 500 660×680×1110 880×1080×1880 2.1 2  layers of light, Visible Light+UVA Remarks TPS:Visible Range:100 ~  8000Lux,Direct Setting,Illuminance deviation:4500±500Lux;UVA range:0.84 ~  5w/m2;        LTPS:Visible Range:100 ~  5000Lux,Direct Setting,Illuminance deviation:4500±500Lux;UVA range:0.84 ~ 1w/m2;        Illumination requirements:The total illumination is not less than 1.2×106  Lux •hr; UVA energy is not less than 200w •hr/ m2.

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!