Photo-stability Chamber(TPS Series)
labonce-TPS series photo-stability chamber is equipped with visible and near-ultraviolet light tubes, can independently control the type of light source, and can real -time printing and recording of visible light and near- UV radiation. visible light and near- ultraviolet can be set directly and adjusted automatically to precisely control both light sources.
◆ Equipped with D65 light source, near ultraviolet wavelength 320-400nm;
◆ Reference Standard: ICHQ1B、Chinese Pharmacopoeia 2020 edition;
◆ Light source design: The use of reasonable light source top design, the shelves of different positions of the sample to receive the light source irradiation of good uniformity;
◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance;
◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean;
◆ Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life;
◆ Control system: Programmable color touch screen controller, with three levels of user rights and audit trail function;
◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data.
◆ Safety device: Compressor overheat and overpressure overload protection, independent overtemperature protection alarm system;
◆ Alarm system:On-site beeping alarm;
◆ Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature inside the container will not change in a short time,The outer door is solid can keep temperature ,It can also prevent the influence of external light;
◆ Other configurations:Test hole、Rubber plug、Mobile casters;
◆ Illumination open:Temperature Fluctuation < ±1.0℃,Temperature deviation of the same layer: < ±2.0℃ ;
◆ Environment Temperature:+5 ~ 35℃ ;
◆ Power:AC220V±10% 50HZ;
◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote SMS alarm.
Model
Temperature Range
( ℃ )
Capacity
(L)
Interior Dimensions(mm)
W×D×H
External Dimensions(mm)
W×D×H
Power
( kW )
Remarks
Labonce-150TPS-1
15 ~ 50
150
650×490×500
830×790×1250
1.2
1 layer of light, Visible Light+UVA
Labonce-300TPS-2
15 ~ 50
300
550×660×770
850×1030×1570
1.5
2 layers of light, Visible Light+UVA
Labonce-500TPS-2
15 ~ 50
500
660×680×1110
880×1080×1880
1.8
2 layers of light, Visible Light+UVA
Labonce-500TPS-3
15 ~ 50
500
660×680×1110
880×1080×1880
2.1
3 layers of light, Visible Light+UVA
Labonce-1000TPS-3
15 ~ 50
1000
1360×490×1360
1620×910×1990
2.5
3 layers of light, Visible Light+UVA
Labonce-150LTPS-1
2 ~ 30
150
650×490×500
830×790×1250
1.5
1 layer of light, Visible Light+UVA
Labonce-500LTPS-2
2 ~ 30
500
660×680×1110
880×1080×1880
2.1
2 layers of light, Visible Light+UVA
Remarks
TPS:Visible Range:100 ~ 8000Lux,Direct Setting,Illuminance deviation:4500±500Lux;UVA range:0.84 ~ 5w/m2; LTPS:Visible Range:100 ~ 5000Lux,Direct Setting,Illuminance deviation:4500±500Lux;UVA range:0.84 ~ 1w/m2; Illumination requirements:The total illumination is not less than 1.2×106 Lux •hr; UVA energy is not less than 200w •hr/ m2.