Labonce Walk-In Stability Chamber
Product categories
Latest product
Photo Stability Chamber(500TPS-2)

Photo Stability Chamber(500TPS-2)

TEMP: 15-50°CCapacity:500L
  • Item NO.:

    500TPS-2
  • Product Origin:

    CHINA
Product introduction


labonce-TPS series photo-stability chamber is equipped with visible and near-ultraviolet light tubes, can independently control the type of light source, and can real-time printing and recording of visible light and near-UV radiation. visible light and near ultraviolet can be set directly and adjusted automatically to precisely control both light sources.


Equipped with D65 light source, near ultraviolet wavelength 320-400nm;The light source of each layer is controlled independently;With three levels of user authority, audit trail;

Reference Standard: ICHQ1B、Chinese Pharmacopoeia 2020 edition;

Light source design: The use of reasonable light source top design, the shelves of different positions of the sample to receive the light source irradiation of good uniformity;

Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance;

Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution

Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life;

Control system: Programmable color touch screen controller, with three levels of user rights and audit trail function;more than 7 inches;With three levels of user authority, audit trail;

Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data.

 Safety device: Compressor overheat and overpressure overload protection, independent overtemperature protection alarm system;

Alarm system:On-site beeping alarm;

Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature inside the container will not change in a short time,The outer door is solid can keep temperature,It can also prevent the influence of external light;

Other configurations:Test hole、Rubber plug、Mobile casters; Door lock;

 Illumination open:Temperature Fluctuation < ±1.0℃,

 Temperature deviation of the same layer: < ±2.0℃ ;

Environment Temperature:+5 ~ 35℃ ;

Power:AC220V±10% 50HZ;

Optional: Temperature-humidity deviation, sudden power failure , control by Remote SMS alarm.


Model

Temperature Range

( ℃ )

Capacity

(L)

Interior Dimensions(mm)

W×D×H

External Dimensions(mm)

W×D×H

Power

( kW )

Remarks

Labonce-150TPS-1

15 ~  50

150

650×490×500

830×790×1250

1.2

1   layer of light, 

Visible Light+UVA

Labonce-300TPS-2

15 ~  50

300

550×660×770

850×1030×1570

1.5

2  layers of light, 

Visible Light+UVA

Labonce-500TPS-2

15 ~  50

500

660×680×1110

880×1080×1880

1.8

2  layers of light,

 Visible Light+UVA

Labonce-500TPS-3

15 ~  50

500

660×680×1110

880×1080×1880

2.1

3  layers of light, 

Visible Light+UVA

Labonce-1000TPS-3

15 ~  50

1000

1360×490×1360

1620×910×1990

2.5

3  layers of light, 

Visible Light+UVA

Labonce-150LTPS-1

2 ~ 30

150

650×490×500

830×790×1250

1.5

1   layer of light, 

Visible Light+UVA

Labonce-500LTPS-2

2 ~ 30

500

660×680×1110

880×1080×1880

2.1

2  layers of light, 

Visible Light+UVA

Remarks

TPS:Visible Range100 ~  8000Lux,Direct SettingIlluminance deviation:4500±500LuxUVA range0.84 ~  5w/m2;        LTPS:Visible Range100 ~  5000Lux,Direct SettingIlluminance deviation:4500±500LuxUVA range0.84 ~ 1w/m2;        Illumination requirementsThe total illumination is not less than 1.2×106  Lux •hr; UVA energy is not less than 200w •hr/ m2.


SEND A MESSAGE

Related products
  • Temperature & humidity chamber Temperature and humidity chamber maintenance free

    Humidity:20~98%RH Capacity:150L~1000L

  • MI Series/MIS Series Mold Incubator(MI Series/MIS Series)

    The mold incubator MI and MIS series are applied in scientific research institutions such as environmental protection, health and epidemic prevention, drug testing, agriculture, animal husbandry, and aquatic products. It is a specialized constant temperature equipment for water analysis, BOD detection, and cultivation of microorganisms such as molds. ◆ Reference Standard:GB/T 28851-2012 Technical conditions for biochemical incubators; ◆ Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber(MI series); ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life; ◆ Control system:LCD temperature controller; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: compressor overheat and overpressure overload protection, independent overtemperature protection alarm system,On-site beeping alarm; ◆ Other configuration:Test holes、mobile casters、   observation windows、   lighting、UV disinfection lights; ◆ Controlling Temperature Precision:MI Temperature Fluctuation:High temperature ±0. 5℃ ;Low temperature  ±1.0℃ ; Temperature Uniformity  ≤ 2.0℃(@37℃); MIS Temperature Fluctuation:±0. 5℃ ,Humidity fluctuation:±5%RH; ◆ Power:AC220V±10% 50HZ; ◆ Environment Temperature:+5 ~  35℃ . Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf     (Standard) Remarks     Mould incubator Labonce-150MI 0 ~  60 150 520×460×600 640×700×1250 0.5 3     No humidity Labonce-250MI 0 ~  60 250 520×460×1050 620×690×1650 0.6 3 Labonce-500MI 0 ~  60 500 680×680×1080 860×1050×1850 1.2 4 Labonce-800MI 0 ~  60 800 1200×490×1360 1390×890×1960 1.5 4 Mould incubator        (With humidity control) Labonce-250MIS 15 ~  50 250 600×500×830 780×870×1650 1.5 3 Humidity range: 50-85% RH Printer options Labonce-500MIS 15 ~  50 500 680×680×1080 860×1050×1850 2.0 4

  • High Precision Freezer Blood Storage Refrigerator

    TEMP:-20℃ Capacity:150L~720L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!