Labonce Walk-In Stability Chamber
Product categories
Latest product
Walk-in stability chamber
Walk-in stability chamber
Walk-in stability chamber
Walk-in stability chamber

Walk-in Stability Chamber(8000L)

Humidity:40~80%RH Capacity:8000L
  • Item NO.:

    8000GS
  • Product Origin:

    CHINA
Product introduction

Ⅰ、Performance Index

1、Reference Standard:GB/T 10586-2006 Humid heat test chamber technical condition, JJF1101-2019 Environmental test equipment temperature, humidity parameters calibration specifications;

2、Temperature Range: 20~45℃,Temperature Fluctuation ≤ ±0.5℃ ,Temperature Deviation≤±1.0℃;

3、Humidity Range:40~80%RH,Humidity Deviation ≤ ±3.0%RH(Customizable Humidity Range:20 ~ 80%RH);

4、Test Points Optional:25℃/60%RH、30℃/65%RH(Low Humidity:40℃/25%RH、25℃/40%RH);

5、Low Temperature Laboratory: The cool storage can be customized≤20℃ and 2~8℃ cold storage.(Temperature Fluctuation≤±1.0℃ ,Temperature Deviation ≤ ±2.0℃).


Ⅱ、Structural features:

Structure system: New air duct system design to ensure the uniformity of indoor temperature and humidity, the inner wall and air duct plate material is stainless steel 304, the bottom full of stainless,Steel 304 patterned anti-skid plate, with hollow tempered glass observation window, lighting, door heating;

Refrigeration System:Original imported refrigeration compressor unit with backup system;

Control System: Programmable color touch screen controller,With three-level user rights, Audit tracking function;

Three Level Authority:Adopt the user name and password to log in. Different user names have different permissions at least three levels or above;

Audit tracking function:The control system is equipped with historical alarm records and operation records, so that users can clearly grasp the operating

Humidity control: Imported capacitive humidity sensor, high precision, low drift, long life, maintenance-free;

Data management :Equipped with a pin-type micro printer and electronic data storage;

Alarm system:On-site beeping alarm;

Safety device:The door is equipped with key safety lock and anti-reverse lock function 、Internal emergency ring function to ensure the safety of users,With a variety of safety protection measures and fault alarm;

Daily monitoring:Configure at least two daily temperature and humidity monitoring points, according to the verification of the lowest and temperature, humidity;

Optional: Web server system for integrated data management of all devices and compliance with FDA 21CFR PART II regulations;

Optional: Temperature-humidity deviation, sudden power failure , control by Remote SMS alarm.


Model

Temperature Range

( ℃ )

Humidity Range (RH)

Capacity

(L)

Interior Dimensions(mm)

W×D×H

External Dimensions(mm)

W×D×H

Power

(kW)

Remarks

Labonce-8000GS

20 ~ 45

40 ~ 80%

8000

1900×2200×2000

2050×3150×2250

5.0

 Customizable

Humidity 

20 ~ 80%RH

Labonce-15000GS

20 ~ 45

40 ~ 80%

15000

1900×4000×2000

2050×4950×2250

5.5

SEND A MESSAGE

Related products
  • Walk-in stability chamber Walk-in Stability Chamber(15000L)

    Humidity:40~80%RH Capacity:15000L

  • Walk-in stability chamber Walk-in Stability Chamber(33000L)

    Humidity:40~80%RH Capacity:33000L

  • Walk-in stability chamber Walk-in Stability Chamber(60000L)

    Humidity:40~80%RH Capacity:60000L

  • Walk-in stability chamber Walk-in Stability Chamber(20000L)

    Humidity:40~80%RH Capacity:20000L

  • Walk-in stability chamber Walk-in Stability Chamber(33000L)

    Humidity:40~80%RH Capacity:33000L

  • Walk-in stability chamber Walk-in Stability Chamber(40000L)

    Humidity:40~80%RH Capacity:40000L

  • Walk-in stability chamber Walk-in Stability Chamber(80000L)

    Humidity:40~80%RH Capacity:80000L

  • LGS series: Special for medicine packages Stability Chamber(LGS series: Special for medicine packages)

    Labonce - LGS  series  medicine  stability chamber  is equipped with  ultra - low  humidity control function, which  meets the requirements of the 2020 Pharmacopoeia and is suitable for GMP and CGMP certified users. ◆ Reference Standard:ICHQ1(A)、Chinese Pharmacopoeia 2020 edition; ◆ Ultra low humidity, special conditions for cartridge testing; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Control system:Programmable color touch screen controller; ◆ Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: compressor overheat and overpressure overload protection, water shortage protection, dry burning protection system, independent overtemperature protection alarm system; ◆ Alarm system:On-site beeping alarm; ◆ Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature and humidity inside the container will not change in a short time,The outer door is solid can keep temperature and humidity,It can also prevent the   influence of external light; ◆ Other configurations:Test hole、Rubber plug、Mobile casters、Door lock; ◆ Special indicators: able to meet 60℃ /10%RH, 25℃ /20%RH special conditions (ambient temperature below 25℃ ); ◆ Controlling Temperature Precision:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±1.0℃ ; ◆ Controlling Humidity Precision:Humidity Fluctuation <  ±3%RH;Humidity Deviation <  ±3%RH; ◆ Environment Temperature:+5  ~  35℃ ; ◆ Power:AC220V±10% 50HZ. ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote  SMS alarm. Model Temperature Range ( ℃ ) Humidity Range (RH) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf    (Standard) Remarks Labonce-250LGS 15 ~  65 10 ~  90% 250 600×500×830 780×880×1650 1.5 3 Single(Temperature+Humidity) Labonce-500LGS 15 ~  65 10 ~  90% 500 680×680×1080 860×1050×1850 2.2 4 Single(Temperature+Humidity) Labonce-520LGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.0 3 A(Temperature+Humidity) 250 600×500×830 3 B(Temperature+Humidity) Labonce-520LCGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.5 3 A(Temperature+Humidity+Visible Light+UVA) 250 600×500×830 3 B(Temperature+Humidity)   Remarks LCGS series: A chamber with temperature, humidity, visible light, UVA four functions, illuminance measurement standard with visible light and UVA     sensor, the visible light value and UVA value are automatically printed and stored; visible light range: 100 ~ 8000Lux, 4500 ± 500Lux, Total illuminance of the light test is not less than 1.2×106 Lux-hr; UVA range: 0.84 ~ 5w/ ㎡ , UVA total energy of not less than 200w-hr/ ㎡ ;When there is no light, the   temperature and humidity indicators are the same as LGS.

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2024 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!