Labonce Walk-In Stability Chamber
Product categories
Latest product
Stability chamber
Stability chamber
Stability chamber

Stability Chamber(UVA)

Humidity:20~95%RH Capacity:150L-500LUVA
  • Item NO.:

    150-500CGS-FC
  • Product Origin:

    CHINA
Product introduction

Labonce - CGS  Medicine  Stability Testing Chamber, Choose the original  imported  high quality  parts,  Stable and  reliable performance,Suitable for GMP and CGMP certified users.


Reference Standard:ICH2003、Chinese Pharmacopoeia 2020 edition;

Insulation material: Overall high density polyurethane foam technology,with good insulation and moisture retention performance;

Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, 

no pollution source, easy to clean;

Control system: Programmable color touch screen controller;more than 7 inches,display frequency conversion output ratio;

Refrigeration system: Imported fully enclosed compressor;Save more than 50% of electricity and water;

Humidity control: Original imported capacitive humidity sensor, high precision, low drift, long service life, maintenance free;

Data management: configuring needle micro printers and electronic data storage functions;

Safety device: Compressor overheat and overpressure overload protection, water shortage protection, dry burning protection system, independent overtemperature protection alarm system;

Alarm system:On-site beeping alarm;

Double Door structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature and humidity inside the container will not change in a short time,The outer door is solid can keep temperature and humidity,It can also prevent the  influence of external light;

Controlling Temperature Precision:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±1.0℃ ;Temperature uniformity<2.0°C(Without light);

Controlling Humidity Precision:Humidity Fluctuation <  ±2%RH;Humidity Deviation <  ±3%RH(Without light);

Lighting system: The visible light range is 100~8000LUX, and the total illumination for the lighting test is not less than 1.2 × 106 LUX · hr;

UV system: The UVA range is 0.84~5w/ ㎡ , and the UVA energy is not less than 200w · hr/ ㎡ ;

Power:AC220V±10% 50HZ;

Environment Temperature:+5  ~  35℃ ; 

Optional: Temperature- humidity deviation, sudden power failure,Remote SMS alarm.


Model

Temperature Range

( ℃ )

Humidity Range

(RH)

Capacity

(L)

Interior Dimensions(mm)

W×D×H

External Dimensions(mm)

W×D×H

Power

(kw)

Shelf

(Standard)

Labonce-150CGS

15~65

20~95%

150

600×405×620

780×830×1480

1.2

3

Labonce-250CGS

15~65

20~95%

250

600×500×830

780×880×1650

1.5

3

Labonce-400CGS

15~65

20~95%

400

600×700×950

780×1060×1750

2.0

3

Labonce-500CGS

15~65

20~95%

500

680×680×1080

860×1050×1850

2.2

4

Remark

Equipped with four functions: temperature, humidity, visible light, and near ultraviolet. Illumination measurement is equipped with visible and UVA sensors as standard, achieving automatic control of illumination. Both visible and UVA values are automatically printed and stored.

SEND A MESSAGE

Related products
  • Temperature Humidity Stability Test Chamber Stability Chamber(150L)

    Humidity:20~95%RH Capacity:150L

  • LGS series: Special for medicine packages Stability Chamber(medicine packages250L-500L)

    Humidity:10~90%RH Capacity:250-500LGS

  • Temperature Humidity Stability Test Chamber Stability Chamber(250L)

    Humidity:20~95%RH Capacity:250L

  • Temperature Humidity Stability Test Chamber Stability Chamber(400L)

    Humidity:20~95%RH Capacity:400L

  • Temperature Humidity Stability Test Chamber Stability Chamber(500L)

    Humidity:20~95%RH Capacity:500L

  • LGS series: Special for medicine packages Stability Chamber(250L+250L)

    Humidity:10~90%RH Capacity:520LGS/LCGS

  • MI Series/MIS Series Mold Incubator(MI Series/MIS Series)

    The mold incubator MI and MIS series are applied in scientific research institutions such as environmental protection, health and epidemic prevention, drug testing, agriculture, animal husbandry, and aquatic products. It is a specialized constant temperature equipment for water analysis, BOD detection, and cultivation of microorganisms such as molds. ◆ Reference Standard:GB/T 28851-2012 Technical conditions for biochemical incubators; ◆ Air-way System: The newly air-way system designed achieves uniform of temperature form different parts inside the chamber(MI series); ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system:Imported fully enclosed industrial compressor, high efficiency, low noise, long life; ◆ Control system:LCD temperature controller; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: compressor overheat and overpressure overload protection, independent overtemperature protection alarm system,On-site beeping alarm; ◆ Other configuration:Test holes、mobile casters、   observation windows、   lighting、UV disinfection lights; ◆ Controlling Temperature Precision:MI Temperature Fluctuation:High temperature ±0. 5℃ ;Low temperature  ±1.0℃ ; Temperature Uniformity  ≤ 2.0℃(@37℃); MIS Temperature Fluctuation:±0. 5℃ ,Humidity fluctuation:±5%RH; ◆ Power:AC220V±10% 50HZ; ◆ Environment Temperature:+5 ~  35℃ . Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf     (Standard) Remarks     Mould incubator Labonce-150MI 0 ~  60 150 520×460×600 640×700×1250 0.5 3     No humidity Labonce-250MI 0 ~  60 250 520×460×1050 620×690×1650 0.6 3 Labonce-500MI 0 ~  60 500 680×680×1080 860×1050×1850 1.2 4 Labonce-800MI 0 ~  60 800 1200×490×1360 1390×890×1960 1.5 4 Mould incubator        (With humidity control) Labonce-250MIS 15 ~  50 250 600×500×830 780×870×1650 1.5 3 Humidity range: 50-85% RH Printer options Labonce-500MIS 15 ~  50 500 680×680×1080 860×1050×1850 2.0 4

  • CH Series Constant Temperature & Humidity Chamber(150CH~500CH,15~60℃)

    Humidity:40~90%RH Capacity:150~500L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!