Labonce Walk-In Stability Chamber
Product categories
Latest product
Stability Chamber, Stability test chamber
Stability Chamber, Stability test chamber
Stability Chamber, Stability test chamber

Stability Chamber 720FS

1)High precision;2)All stainless steel 304 inside and outside;.

3)Temperature:0~70℃;4)Humidity:10~80%RH.

  • Item NO.:

    720FS
  • Product Origin:

    CHINA
Product introduction

Labonce-FS series of high-precision stability test chamber, configured with a large screen colour touch screen controller with three levels of authority and audit trail function, inside and outside the full stainless steel 304 process, so that it has a strong anti-corrosion ability, the use of imported high-quality components, stable and reliable performance.


Internal Volume: 700L;
Temperature Range: 0~70℃; Temperature Fluctuation: <±0.2℃; Temperature Deviation: <±0.5℃;
Humidity Range: 10~80%RH; Humidity Fluctuation: <±1.5%RH; Humidity Deviation: <±2.0%RH;
Temperature & Humidity Controller: Large programmable color touchscreen controller (7 inches or above),       with three-level access control and audit trail functionality;
Humidity Sensor: Imported high-temperature-resistant capacitive humidity sensor, direct detection,             maintenance-free;
Refrigeration Compressor: Imported fully enclosed inverter compressor, long lifespan, low noise;
Data Storage: Electronic data storage function, retention for over 5 years;
Data Interface: Supports MODBUS-RTU communication protocol;
 On-Site Alarm: Audible alarm for temperature/humidity deviation, independent over-temperature alarm;
❿ Remote Alarm: Remote SMS alert (including power failure alarm), multiple devices can share one SIM card;
 Chamber Material: Interior and exterior constructed with 304 stainless steel for superior corrosion       resistance;
 Dual-Door Structure: Inner tempered glass door for easy observation; outer solid door blocks external light       interference;
 Five-Level Protection: Dual dry-burn protection system; independent over-temperature protection with automatic power cutoff;
Safety Features: Compressor overheat protection, overpressure protection, overload protection, and fan            overheat protection;
Power Supply: AC 220V±10%, 50Hz;
⓰ Operating Environment: +5~35℃ (recommended below 30℃; for extreme conditions, maintain below             25℃);

⓱ Note: Click the PDF and WORD icons below for downloadable brochures and detailed documents.


Model

Temperature range (℃) 

Humidity range (RH) 

Volume (L)

Inner dimensions

  W×D×H(mm) 

Overall dimensions

  W×D×H(mm)

Power (KW) 

Shelf

 (standard) 

Labonce-720FS

 0 70

1080%

700

  975×575×1250

  1280×880×1940

2.5

4/8

SEND A MESSAGE

Related products
  • Stability Chamber, Stability test chamber Stability Chamber 250FS

    1)High precision; 2)All stainless steel 304 inside and outside;. 3)Temperature:0~70℃; 4)Humidity:10~80%RH.

  • Stability Chamber, Stability test chamber Stability Chamber 250FT

    1)High precision;2)All stainless steel 304 inside and outside;. 3)Temperature:0~70℃;4)Humidity:10~80%RH.

  • Stability Chamber, Stability test chamber Stability Chamber 720FT

    1)High precision;2)All stainless steel 304 inside and outside;. 3)Temperature:0~70℃;4)Humidity:10~80%RH.

  • LGS series: Special for medicine packages Stability Chamber(LGS series: Special for medicine packages)

    Labonce - LGS  series  medicine  stability chamber  is equipped with  ultra - low  humidity control function, which  meets the requirements of the 2020 Pharmacopoeia and is suitable for GMP and CGMP certified users. ◆ Reference Standard:ICHQ1(A)、Chinese Pharmacopoeia 2020 edition; ◆ Ultra low humidity, special conditions for cartridge testing; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Control system:Programmable color touch screen controller; ◆ Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: compressor overheat and overpressure overload protection, water shortage protection, dry burning protection system, independent overtemperature protection alarm system; ◆ Alarm system:On-site beeping alarm; ◆ Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature and humidity inside the container will not change in a short time,The outer door is solid can keep temperature and humidity,It can also prevent the   influence of external light; ◆ Other configurations:Test hole、Rubber plug、Mobile casters、Door lock; ◆ Special indicators: able to meet 60℃ /10%RH, 25℃ /20%RH special conditions (ambient temperature below 25℃ ); ◆ Controlling Temperature Precision:Temperature Fluctuation <  ±0. 5℃;Temperature Deviation <  ±1.0℃ ; ◆ Controlling Humidity Precision:Humidity Fluctuation <  ±3%RH;Humidity Deviation <  ±3%RH; ◆ Environment Temperature:+5  ~  35℃ ; ◆ Power:AC220V±10% 50HZ. ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote  SMS alarm. Model Temperature Range ( ℃ ) Humidity Range (RH) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Shelf    (Standard) Remarks Labonce-250LGS 15 ~  65 10 ~  90% 250 600×500×830 780×880×1650 1.5 3 Single(Temperature+Humidity) Labonce-500LGS 15 ~  65 10 ~  90% 500 680×680×1080 860×1050×1850 2.2 4 Single(Temperature+Humidity) Labonce-520LGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.0 3 A(Temperature+Humidity) 250 600×500×830 3 B(Temperature+Humidity) Labonce-520LCGS 15 ~  65 10 ~  90% 250 600×500×830 1610×870×1650 3.5 3 A(Temperature+Humidity+Visible Light+UVA) 250 600×500×830 3 B(Temperature+Humidity)   Remarks LCGS series: A chamber with temperature, humidity, visible light, UVA four functions, illuminance measurement standard with visible light and UVA     sensor, the visible light value and UVA value are automatically printed and stored; visible light range: 100 ~ 8000Lux, 4500 ± 500Lux, Total illuminance of the light test is not less than 1.2×106 Lux-hr; UVA range: 0.84 ~ 5w/ ㎡ , UVA total energy of not less than 200w-hr/ ㎡ ;When there is no light, the   temperature and humidity indicators are the same as LGS.

  • Medicine Stability Testing Chamber Medicine Stability Testing Chamber With good heat preservation

    Humidity:20~95%RH Capacity:150L~500L

  • Medicine Stability Testing Chamber Medicine Stability Testing Chamber With Double open door(≥800L)

    Humidity:20~95%RH Capacity:800L~2000L

  • Comprehensive Stability Chamber Stability Chamber (220L+220L+480L)

    Humidity:20~95%RH Capacity:930L

  • Stability chamber Stability Chamber 520LCGS

    Humidity:20~95%RH Capacity:520L

Beijing Labonce Themostatic Technology Company

Professional Technology , Good Products

Email: export@labonce.com FDA/ICH stability Chamber

© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved

Online contact

Online contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!