Newsletter
Keep up with our latest news and events.
Enter your email and subscribe to our newsletter
Humidity:40~95%RH Capacity:150L~500L
Read moreItem NO.:
9052DHP-9602DHPProduct Origin:
CHINALabonce - DHP electric thermostat incubator is used in medical and health care, pharmaceutical industry, biochemistry and agricultural science and other scientific research and industrial production departments to do bacteria culture, fermentation and constant temperature test.
❶ |
Reference standard: YY 0027-1990 electrothermal incubator; |
❷ |
Heating method: Air jacket electric heating, fast heating speed; |
❸ |
Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel,four corners half circle arc over plating, shelf can be free loading and unloading; |
❹ |
Control System:High precision microcomputer digital display controller with timing function; |
❺ |
External door design: double doors with built-in glass doors for easy observation of culture changes; |
❻ |
Controlling Temperature Precision:Temperature resolution: 0.1 ℃ ; Temperature uniformity ± 1.5 ℃ (@ 37 ℃ ); |
❼ |
Environment Temperature:+5 ~ 35℃ ; |
❽ |
Power:AC220V±10% 50HZ; |
❾ |
Optional: Touch screen controller with three- level permissions and audit tracking,Model is HI. |
Name |
Model |
Temperature Range ( ℃ ) |
Capacity (L) |
Interior Dimensions(mm) W×D×H |
External Dimensions(mm) W×D×H |
Power ( kW ) |
Shelf (Standard) |
Remarks |
Electrothermal Incubator |
Labonce-9052DHP |
RT+5 ~ 65 |
50 |
415×360×355 |
690×500×500 |
0.3 |
2 |
|
Labonce-9082DHP |
RT+5 ~ 65 |
80 |
500×400×400 |
780×530×560 |
0.4 |
2 |
|
|
Labonce-9162DHP |
RT+5 ~ 65 |
160 |
500×500×650 |
790×630×810 |
0.6 |
2 |
|
|
Labonce-9272DHP |
RT+5 ~ 65 |
270 |
600×600×750 |
890×740×910 |
0.8 |
2 |
|
|
Labonce-9402DHP |
RT+5 ~ 65 |
400 |
640×585×1355 |
780×750×1880 |
1.1 |
3 |
|
|
Labonce-9602DHP |
RT+5 ~ 65 |
600 |
840×600×1355 |
980×800×1880 |
2.2 |
4 |
|
labonce-TPS series photo-stability chamber is equipped with visible and near-ultraviolet light tubes, can independently control the type of light source, and can real -time printing and recording of visible light and near- UV radiation. visible light and near- ultraviolet can be set directly and adjusted automatically to precisely control both light sources. ◆ Equipped with D65 light source, near ultraviolet wavelength 320-400nm; ◆ Reference Standard: ICHQ1B、Chinese Pharmacopoeia 2020 edition; ◆ Light source design: The use of reasonable light source top design, the shelves of different positions of the sample to receive the light source irradiation of good uniformity; ◆ Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance; ◆ Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean; ◆ Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life; ◆ Control system: Programmable color touch screen controller, with three levels of user rights and audit trail function; ◆ Data management :Configure needle type micro printer and electronic data storage function,support to use U disk to export the data. ◆ Safety device: Compressor overheat and overpressure overload protection, independent overtemperature protection alarm system; ◆ Alarm system:On-site beeping alarm; ◆ Double Door Structure:Interior door tempered glass door,Open the outer door to observe the samples,The temperature inside the container will not change in a short time,The outer door is solid can keep temperature ,It can also prevent the influence of external light; ◆ Other configurations:Test hole、Rubber plug、Mobile casters; ◆ Illumination open:Temperature Fluctuation < ±1.0℃,Temperature deviation of the same layer: < ±2.0℃ ; ◆ Environment Temperature:+5 ~ 35℃ ; ◆ Power:AC220V±10% 50HZ; ◆ Optional: Temperature- humidity deviation, sudden power failure , control by Remote SMS alarm. Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power ( kW ) Remarks Labonce-150TPS-1 15 ~ 50 150 650×490×500 830×790×1250 1.2 1 layer of light, Visible Light+UVA Labonce-300TPS-2 15 ~ 50 300 550×660×770 850×1030×1570 1.5 2 layers of light, Visible Light+UVA Labonce-500TPS-2 15 ~ 50 500 660×680×1110 880×1080×1880 1.8 2 layers of light, Visible Light+UVA Labonce-500TPS-3 15 ~ 50 500 660×680×1110 880×1080×1880 2.1 3 layers of light, Visible Light+UVA Labonce-1000TPS-3 15 ~ 50 1000 1360×490×1360 1620×910×1990 2.5 3 layers of light, Visible Light+UVA Labonce-150LTPS-1 2 ~ 30 150 650×490×500 830×790×1250 1.5 1 layer of light, Visible Light+UVA Labonce-500LTPS-2 2 ~ 30 500 660×680×1110 880×1080×1880 2.1 2 layers of light, Visible Light+UVA Remarks TPS:Visible Range:100 ~ 8000Lux,Direct Setting,Illuminance deviation:4500±500Lux;UVA range:0.84 ~ 5w/m2; LTPS:Visible Range:100 ~ 5000Lux,Direct Setting,Illuminance deviation:4500±500Lux;UVA range:0.84 ~ 1w/m2; Illumination requirements:The total illumination is not less than 1.2×106 Lux •hr; UVA energy is not less than 200w •hr/ m2.
Pay attention to WeChat