400-600-8767
export@labonce.com
ch
en
Newsletter
Keep up with our latest news and events.
Enter your email and subscribe to our newsletter
Humidity：40~95%RH Capacity：150L~500L
Read more
Humidity：10~90%RH 
Capacity：DesignProduct Origin:
CHINA
Labonce-CGS-T Series Customized Pharmaceutical Stability Test Chamber
This customized system can be tailored to meet specific user requirements including customized operating conditions and chamber volumes, such as forced degradation testing and four-chamber stability test chambers.
❶ Chamber capacity: Customized
❷ Temperature control: Customized
❸ Humidity control: Customized
❹ Controller: Programmable color touchscreen (≥7"), with three-level access control
❺ Humidity sensor: Imported capacitive sensor (direct detection, maintenance-free)
❻ Compressor: Imported hermetic compressor (long lifespan, low noise)
❼ Data printing: Prints device model/serial number plus temperature/humidity values and curves
❽ Data storage: Stores temperature/humidity data for 5+ years
❾ On-site alarms: Audible alarms for parameter deviations and independent overtemperature alarm
❿ Remote alarm: SMS alerts (including power failure), supports multiple devices per SIM card
⓫ Construction: 304 stainless steel interior (mirror finish), powder-coated steel exterior
⓬ Dual protection: Dry-burn prevention system + independent overtemperature protection with auto power cutoff
⓭ Safety features: Compressor overheat/overpressure/overload protection + fan overheat protection
⓮ Power supply: AC 220V±10%, 50Hz
⓯ Operating environment: +5-35°C (recommended ≤30°C, maximum ≤26°C)
Previous :
Stability Chamber(3000L)Next :
Stability Test Chamber (Triple Independent)
Mold Incubator 500MIS
Mold incubator MIS series is used in environmental protection, health epidemic prevention, drug testing, agriculture, livestock and aquatic research institutes. It is a special constant temperature equipment for water analysis, BOD detection, mold and other microbial culture. ❶ Internal volume: 250L~500L; ❷ Temperature control range: 50 ~ 85 ℃, temperature fluctuation: high temperature ± 0.5 ℃, low temperature ± 1 ℃; uniformity ± 2.0 ℃. ❸ Controller: microcomputer controller, sensitive sensing, small system error; ❹ Compressor: fully enclosed compressor, high efficiency, low noise; to ensure long-term continuous operation of the equipment: ❺ Data printing: optional; ❻ Lamp: with lighting, with UV sterilization lamp; ❼ Chamber material: liner material for mirror stainless steel 304, corners of the semi-circular arc, easy to clean, chamber shelf spacing adjustable; ❽ Chamber door structure: the use of double-layer tempered glass door, easy to observe the samples in the chamber; ❾ System protection: equipped with independent over-temperature protection system; ❿ Safety devices: compressor overheating protection, compressor overpressure protection, compressor overload protection and fan overheating protection. ⓫ Working environment: ＋5～35℃. ⓬ Power supply: AC220V±10%50Hz. ⓭ Special Note: Consult the PDF and WORD icons below online to download the color page related information on this page. Name Model Temperature Range ( ℃ ) Capacity (L) Interior Dimensions(mm) W×D×H External Dimensions(mm) W×D×H Power (kW) Shelf (Standard) Remarks Mould incubator Labonce-150MIT 0 ~ 60 150 520×460×600 640×700×1250 0.5 3 With viewing window No humidity Labonce-250MIT 0 ~ 60 250 520×460×1050 620×690×1650 0.6 3 Labonce-500MIT 0 ~ 60 500 680×680×1080 860×1050×1850 1.2 4 No humidity Labonce-800MIT 0 ~ 60 800 1200×490×1360 1385×895×1965 1.5 4 Mould incubator (With humidity control) Labonce-250MIS 15 ~ 50 250 600×500×830 780×870×1650 1.5 3 Humidity range: 50-85% RH Printer options Labonce-500MIS 15 ~ 50 500 680×680×1080 860×1050×1850 2.0 4
Professional Technology , Good Products
Email: export@labonce.com FDA/ICH stability Chamber
© 2008-2025 Beijing Labonce Themostatic Technology Company All Rights Reserved
Friendship link ：
Pay attention to WeChat