Stability Chamber(medicine packages250L-500L)

Humidity：10~90%RH

Capacity：250-500LGS

Item NO.:
250-500LGS
Product Origin:
CHINA

Online consulting

Product introduction

Labonce-LGS series medicine stability chamber is equipped with ultra-low humidity control function, which meets the requirements of the 2020 Pharmacopoeia and is suitable for GMP and CGMP certified users. Stability Chamber(LGS series: Special for medicine packages)

❶	Reference Standard：ICHQ1(A)、Chinese Pharmacopoeia 2020 edition;
❷	Ultra low humidity, special conditions for cartridge testing;
❸	Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance;
❹	Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean;
❺	Control system：Programmable color touch screen controller;
❻	Refrigeration system: Imported fully enclosed compressor, high efficiency, low noise, long service life;
❼	Data management ：Configure needle type micro printer and electronic data storage function，support to use U disk to export the data.
❽	Safety device: compressor overheat and overpressure overload protection, water shortage protection, dry burning protection system, independent overtemperature protection alarm system;
❾	Alarm system：On-site beeping alarm;
❿	Double Door Structure：Interior door tempered glass door，Open the outer door to observe the samples，The temperature and humidity inside the container will not change in a short time，The outer door is solid can keep temperature and humidity，It can also prevent the influence of external light;
⓫	Other configurations：Test hole、Rubber plug、Mobile casters、Door lock;
⓬	Special indicators: able to meet 60℃ /10%RH, 25℃ /20%RH special conditions (ambient temperature below 25℃ );
⓭	Controlling Temperature Precision：Temperature Fluctuation ＜ ±0.5℃；Temperature Deviation ＜ ±1.0℃ ;
⓮	Controlling Humidity Precision：Humidity Fluctuation ＜ ±3%RH；Humidity Deviation ＜ ±3%RH;
⓯	Environment Temperature：+5 ～ 35℃ ;
⓰	Power：AC220V±10% 50HZ.
⓱	Optional: Temperature-humidity deviation, sudden power failure , control by Remote SMS alarm.

Model	Temperature Range ( ℃ )	Humidity Range (RH)	Capacity (L)	Interior Dimensions (mm) W×D×H	External Dimensions (mm) W×D×H	Power (kw)	Shelf (Standard)	Remarks
Labonce-250LGS	15~ 65	10 ~ 90%	250	600×500×830	780×880×1650	1.5	3	Single (Temperature +Humidity)
Labonce-500LGS	15~ 65	10 ~ 90%	500	680×680×1080	860×1050×1850	2.2	4	Single (Temperature +Humidity)
Remarks	LCGS series: A chamber with temperature, humidity, visible light, UVA four functions, illuminance measurement standard with visible light and UVA sensor, the visible light value and UVA value are automatically printed and stored; visible light range: 100 ~ 8000Lux, 4500 ± 500Lux, Total illuminance of the light test is not less than 1.2×106 Lux-hr; UVA range: 0.84 ~ 5w/ ㎡ , UVA total energy of not less than 200w-hr/ ㎡ ;When there is no light, the temperature and humidity indicators are the same as LGS.

Tags : test chamber Stability test chamber Stability Chamber Stability testing chamber pharmaceutical stability test chambers Temperature and humidity chamber

Previous :
Stability Chamber(250L)
Next :
Stability Chamber(UVA)

SEND A MESSAGE

Stability Chamber(medicine packages250L-500L)

Newsletter